How to replace the atomizer coil？
When to Replace the Atomizer Coil
There is no fixed replacement cycle for atomizer coils in practical use. It is solely based on the user's own experience to determine whether it has reached the replacement period. The following indicators can be used as a reference:
A. Judging by changes in the e-liquid flavor. During use, if the e-liquid flavor deteriorates, accompanied by a burnt taste (cotton burning flavor), and there is a stronger throat hit and a sensation of "spiciness," it is time to check if the atomizer coil has accumulated excessive carbon and needs to be replaced.
B. Observe the interior of the atomizer coil. You can remove the tank and observe the coil's surrounding cotton for signs of burning, discoloration, and carbon buildup. Based on the situation, you can decide whether to replace it.
How to Replace the Atomizer Coil in an Electronic Cigarette
As a new way of smoking, electronic cigarettes are being recognized and accepted by more people. In the process of using an electronic cigarette, replacing the atomizer coil is an essential step.
How do you replace the atomizer coil?
Rotate counterclockwise to open the bottom of the atomizer.
Then, rotate counterclockwise to unscrew the old atomizer coil.
Screw in the new or spare atomizer coil (this time, rotate clockwise, and remember to tighten it).
Finally, rotate clockwise to screw the previously opened bottom of the atomizer back into place.
Important points to note:
Before replacing the atomizer coil, make sure there is no e-liquid in the atomizer to avoid leakage.
When screwing in the new atomizer coil, make sure to tighten it properly, but not excessively tight to avoid difficulties in removing it during the next coil replacement.
What Resistance is Needed in an Electronic Cigarette Atomizer to Avoid a Burnt Taste
The core reason for a burnt taste is the rapid evaporation of e-liquid on the wicking material, leading to dry hits. To avoid this, you can either reduce the heat generated or increase the wicking material's capacity. Most pre-built atomizers cannot change the wicking material's capacity, so the only option is to lower the output voltage or power of the battery. Taking the simple CE4 atomizer as an example, it typically has a resistance of around 2.4 ohms. If the output voltage exceeds 4V, a burnt taste may occur. If you are unsure about the atomizer model you are using, it is recommended to use a regulated device and gradually adjust the voltage or power from low to high to find the optimal output setting.
Electronic cigarettes are a small technological product, so they can be a bit more complicated to use compared to traditional cigarettes. However, electronic cigarettes are far less harmful than traditional cigarettes, so it is better to choose electronic cigarettes. Although the atomizer coil in an electronic cigarette needs to be replaced, its lifespan can be a few months, so it is not very troublesome.
