What to pay attention to when using vapes？

For the use of vapes, novices often pay attention to some precautions.Today, let's explain some things to pay attention to when using electronic cigarettes.

1. frying oil problem

vape frying oil refers to the phenomenon of frying oil
caused by cotton, power, temperature control, smoke oil and heating wire.

(1) Regarding the cotton issue.
A large part of the frying oil issue is related to cotton.
The coils we make are usually perfect, why is there frying oil during use?
The reason may be that we don't have enough cotton when we wear cotton.
Obviously, the cotton is full when filling the coil,
but due to the shrinkage of the cotton,
when the cotton is wetted by the e-liquid,
it will become thinner and cannot completely fill the coil,
resulting in insufficient cotton in the middle of the coil,
which will cause the problem of frying oil, and also It's uneven heating.

(2) Power problem.
Frying oil has a close relationship with power.
For example, we use a low resistance of 0.5Ω,
usually when it is pushed to about 30 watts,the atomization effect is relatively complete.
But if we only use 20 watts or 15 watts,the power is insufficient, the heating speed will slow down,
and the e-liquid cannot be atomized sufficiently and quickly,so there will be oil frying.
On the other hand, if the power is too high, it will also cause frying oil.

(3) Temperature control problem.
Temperature control is also one of the factors
that easily cause frying oil problems.
This is unavoidable,
because the temperature control needs to increase the temperature instantaneously,
which is an explosive output, which will also cause frying.
In addition, when nickel 200 is used as the temperature control material,
due to its loose winding method,
it is more prone to oil frying problems than tight winding.

For the solution to the frying oil problem,
the first thing to do is to ensure
that the proper e-liquid and atomizing core are used correctly.
Secondly, when filling the coil,
the cotton should be fully filled to ensure
that the cotton in the coil is even and sufficient.
Also, choose power and temperature reasonably
and avoid settings that are too low or too high.
If the problem persists,
you can try to replace the atomizing core
or consult a professional vape after-sales service.

2. oil spill problem

When we refer to vape oil leakage,
it refers to the flow of e-liquid from abnormal channels,
such as leakage from the outside of the glass of the atomization chamber,
the base of the atomizer, or the outside of the cigarette holder.
The occasional inhalation of e-liquid in the mouth
is usually water droplets condensed from atomized steam,
which is not a phenomenon of oil leakage.

The way to solve the oil leakage problem
is to shake the cigarette holder down to get rid of the residual liquid,
then tighten it with a paper towel and rotate it to wipe dry.
If the problem persists, consider replacing the atomizing core.
Usually, this kind of problem is more common among novices.
Many people don’t know how to operate it correctly
when they use vapes for the first time,
and it is easy to cause the liquid to enter the mouth.
Experienced vapers rarely encounter this problem



3. prolonged continuous smoking

Continuous use of vapes for too long may cause the device to overheat,which may have some negative effects on vapes.
Therefore, when using electronic cigarettes,it is recommended to properly control the smoking time and frequency,and give the device a certain rest time to prevent problems caused by overheating.
In addition to the hazards of vape liquids,vapes themselves may cause accidents and cause harm to your body,so people who use vapes must carefully check vapes.